Events - Axis M3004-V User Manual

AXIS M3004-V Network Camera

Events

Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installed applications to trigger the rule, see Applications, on page 28.
• Detectors
- Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 25.
- Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 25.
• Hardware
- Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
• Input Signal
Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
-
the Live View Page, on page 9 . This can for example be used to validate actions during product installation
and configuration.
• PTZ
Storage
•
Available — trigger the rule when the storage device is unmounted or removed. This can for example be
-
used to send maintenance notifications.
Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be
-
overwritten to prevent the storage device from becoming full.
Locked — trigger the rule if the storage device is locked (write protected).
-
• System
- System Initializing — trigger the rule when the product is being started. This can for example be used to send a
notification when the product restarts.
• Time
- Recurrence — trigger the rule periodically, see Recurrences, on page 32. This can for example be used to upload
an image every 5 minutes.
- Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 32.
Available actions include:
• PTZ Control
- Preset Position — go to a preset position.
- Guard Tour — start a guard tour, see Guard Tour, on page 23.
• Record Video — record video to a selected storage.
• Send Images — send images to a recipient.
• Send Notifications — send a notification message to a recipient.
30