Packages Not Listed With Pkgadd - Equinox Systems MEGAPORT Read This First Manual

Packages Not Listed With pkgadd

If no packages are listed after you execute the
mount and unmount the package disk. This appears to be a problem with some
versions of SVR4 in the implementation of
mount and unmount the package disk:
Follow the installation procedure outline in Installing Version 2.02 Device Driver. To
complete the installation:
Note: The device name /dev/dsk/f03ht refers to a 3½ inch floppy drive
configured as drive 0. Substitute 1 for 0 if your 3½ floppy is configured as
the second drive. Substitute the 3 with the number 5 if you are using a 5¼
diskette (i.e. /dev/dsk/f05ht) when drive 0 is a 5¼ diskette.
Ignore -ixon: +ixon
Some applications (such as FoxBase+) disable XON/XOFF software flow control (i.e.
-ixon). Use megastty with the +ixon flag to ignore -ixon on a port.
Example:
MEGAPORT / MEGAPLEX
Streams Release Notes 2.24
# mount -Fs5 /dev/dsk/f03ht /mnt <CR>
# pkgadd -d /dev/dsk/f03ht <CR>
# umount /mnt
When logged into a MEGAPORT port, enter the following cause the
driver to honor XON/XOFF flow control independent of whether the
port is set up for -ixon, enter:
To disable the operation of this feature, type:
pkgadd
. Follow these steps to manually
pkgadd
megastty +ixon
megastty -ixon
command, you must manually
5