Page 1
HDCD System manufactured under license from Pacific Microsonics, Inc. This product is covered by one or more of the following: U. S. Patent No. 5,479,168; 5,638,074; 5,640,161; 5,808,574; 5,838,274; 5,854,600; 5,864,311; 5,872,531, and Australia Patent No. 669,114 with other patents pending. McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549...
McIntosh or have the same characteristics as the origi- 9. Do not install near any heat sources such as radiators, nal part. Unauthorized substitutions may result in fire, heat ducts or other equipment that produce heat.
MDA5000 . It will accommodate up to three source devices 2 Chambers Street with digital outputs to be connected to the converter. The MDA5000 can only decode one input source at a time. If the Binghamton, New York 13903 MDA5000 receives more than one digital signal...
HDCD Decoder with 24 Bit 8 Times Over-Sampling Digital Filter The MDA5000 is equipped with a powerful 24 Bit digital signal processor. This digital signal processor can provide automatic HDCD decoding and 8 times over sampling digital filter function for both CD and HDCD. The HDCD decoder provides a wider dynamic range when the HDCD disc is used.
Dimensions Dimensions The following dimensions can assist in determining the best location for your MDA5000. There is additional infor- mation on the next page pertaining to installing the MDA5000 into your vehicle. op View of the MDA5000 " 27. 5cm "...
Installation emove Top Cover Screws It is recommended that a professional who is skilled in all aspects of installation and operation install the MDA5000 and any associated mobile audio equipment. Converter Ventilation Always provide adequate ventilation for the MDA5000 and be sure to provide at least 1 inch clearance at the sides with the fins.
Connect to the Negative (-) Connect to the positve (+) Receives the Turn-ON Signal from a vehicle battery terminal vehicle battery terminal McIntosh Control Center and sends a Turn-ON Signal on to another component in the Audio System COAXIAL DIGITAL OPTICAL DIGITAL AUDIO...
How to Connect How to Connect The McIntosh MDA5000 is intended to be utilized in an cables to the battery. The second ON Connector provides the Power On Signal for another Audio System that can support a separate outboard Digital component in the Audio System.
If a shipping carton or any of the interior part(s) are needed, please call or write Customer Service Department of McIntosh Labo- ratory. Please see the Part List for the correct part numbers.
Page 12
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. Printed in the U.S.A. McIntosh Part No. 04076701...
Need help?
Do you have a question about the MDA5000 and is the answer not in the manual?
Questions and answers