Connecting The Infrared Sensor - Avermedia TVPhone98 Installation Manual

Connecting the Infrared Sensor

®
If you have the AVerMedia
Plug the supplied Infrared
Sensor Cable to the "IR
Input" connector (which is
the red 2.5mm stereo jack)
of the All-in-one Cable.
®
If you have the AVerMedia
After connecting the Infrared Sensor Cable, position the infrared receiver on top of
the system unit facing towards you.
CAUTION!
Do not plug anything to the IR Input Connector of the All-in-one
Cable except for the infrared sensor cable. Connecting other
cables will cause devastating damage to the system!
6
TVPhone98 card :
TVCapture98 card :
Plug the supplied Infrared Sensor Cable
to the AVerMedia
"REMOTE" port.
®
TVCapture98
Installation Guide