Connecting The External Video Source - Avermedia TVPhone98 Installation Manual

Connecting the External Video Source

Connecting to a Composite Video Source
Use a standard composite video
cable. Plug one end of this cable
to the "VIDEO" port on the card
and the other end to the "VIDEO
OUT" socket of the video device.
Connecting to AN S-Video Source
If you have the AVerMedia
Use a standard S-video
cable. Plug one end of
this cable to the "S-
VIDEO IN" connector
(which is the "4-pin
MiniDin" connector) of
the All-in-one cable and
the other to the "S-
VIDEO OUT" socket of
the video device.
If you have the AVerMedia
Connect your S-video cable to the AVerMedia
and the "VIDEO OUT" socket of the video device. (Refer to the figure on the next
page.)
Installation Guide
®
TVPhone98 card :
®
TVCapture98 card :
®
TVCapture98 "S-VIDEO" port
7