Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hotpoint HTS93G
Summary of Contents for Hotpoint HTS93G
- Page 1 Model: HTS93G...
- Page 2 Installation The minimum distance between the supporting surface ! It is important to conserve this booklet for for the cooking vessels on the hob and the lowest part consultation at any moment. In the case of sale, of the range hood must be not less than 50cm from cession or move, make sure it is together with the electric cookers and 65cm from gas or mixed cookers.
- Page 3 Preliminary information for installing the hood: Disconnect the power supply at the domestic main switch before carrying out electrical connections. Remove the grease filter/s. 1. Using a pencil, draw the centre line on the wall up to the ceiling to facilitate installation operations. 2.
-
Page 4: Description Of The Appliance
Description of the appliance Control panel Calibrating the control panel or one of the following keys: When the plug is inserted (or after a blackout) the system calibrates the keys; during calibration all the luminous display parts flash. Calibration lasts 15”. All the display parts stop flashing at the end of calibration. - Page 5 Operation ! We advise switching the hood on, at minimum power, before beginning to cook to favour the optimal expulsion of odours. In addition we advise turning it off every time 10/15 minutes after finishing cooking. ! We advise frying under the hood only under constant supervision.
- Page 6 Maintenance It is always necessary to isolate the hood from the Cleaning the grease filters power supply during cleaning and maintenance. Traps cooking grease particles. Therefore remove the plug. This must be cleaned once a month (or when the filter We recommend carrying our maintenance regularly saturation indication system –...
- Page 7 Cleaning the carbon filter Replacing lamps It absorbs unpleasant odours caused by cooking. Disconnect the hood from the electricity. The charcoal filter can be washed once every two Warning! Prior to touching the light bulbs ensure they months (or when the filter saturation indication system are cooled down.
- Page 8 Caution General safety Disposal • Disposing of the packaging material: keep to the Do not connect the appliance to the mains until the installation is fully complete. local regulations so that the packaging can be re-used. ! In case of anomalies apply to the authorized technical Before any cleaning or maintenance operation, disconnect the hood from the mains by removing assistance service and require original spare parts.
Need help?
Do you have a question about the HTS93G and is the answer not in the manual?
Questions and answers