POSIFLEX CR-4000 User Manual

POSIFLEX CR-4000 User Manual

Cr-4000/6000 series cash drawer
Hide thumbs Also See for CR-4000:

Advertisement

CR-4000/6000 SERIES

CASH DRAWER

USER'S MANUAL
Rev. A2
FCC Notes:
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions manual, may cause
interference to radio communications. It has been tested and found to comply with
limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which
are designed to provide reasonable protection against interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to take
whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided "as is" and Posiflex Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Inc. 2006
All brand and product names and trademarks are the property of their respective holders.
Part 1
19240901041
P/N:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CR-4000 and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX CR-4000

  • Page 1: Cash Drawer

    CR-4000/6000 SERIES CASH DRAWER USER’S MANUAL Rev. A2 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with...
  • Page 2: Carton Contents

    2. CR-621X series is heavy duty metal casing INFERFACE APPLICATION Security Power / Model Number Interface Code Source CR-4000/4020/4100/ 12/24 V Pulse Printer drive N. A. 4210/CR-6210 / Printer CR-4001/4101/4211 Dedicated RS232 serial N. A.
  • Page 3: Installation

    For CR-4005-II/ 4105-II/ 4215-II/ 6215: USB cable is already built on. Power Source depend on model a). For CR-4000/ 4020/ 4100/ 4210/ 6210: not applicable b). For CR-4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/ 4213/ CR4005-II / 4105-II/ 4215-II/ 6215: Power adapter 12VAC 1.5A c).
  • Page 4 CR4001 / 4101 / 4211 1). Connect the drawer serial I/P port to the computer COM port. Connect the power adapter output to the Power Input jack 2). No other RS232C devices should be connected to the serial O/P port. 3).
  • Page 5 Set security code. (Default Setting: BIT 1,2,3 OFF and BIT 4,5,6,7,8 ON. Security code is 07H) Number to be added to the 64 128 security code if OFF. BIT1 ON and BIT2 OFF to receive security code via Pin2 of P4 (DB9F).
  • Page 6 should never be any 2 USB interface cash drawers carrying the same drawer number. Connect to USB Port of Main PC AC 12V I/P Ground Power Jack of CR4005-II/ 4105-II/ USB Connector from CR4005-II/ 4105-II/ 4215-II/6215 4215-II/ 6215 Rear View of Model CR4005-II/ 4105-II/ 4215-II/ 6215 Cash Drawer with USB Interface Switch settings: Drawer...
  • Page 7 7.0 Kg (CR-4000) 8.8 Kg (CR-6000) Removable tray with a lock-on cover (option) ELECTRICAL: Power Source Solenoid Drive (for CR-4000 / 4020 / 4100 / 4210 / 6210) Pulse Amplitude 12 to 24 VDC Pulse Width 100 to 250 msec Pulse Duty Cycle 10% max.
  • Page 8: Keylock Operation

    ): Automatically open the drawer by POS printer or POS system or interface Keylock signal control STRUCTURE Check Slot Inside CR-4000/ 4001/ 4002/ 4003/ 4004/ 4005-II/ 4100/ 4101/ 4102/ 4103/ 4104/4105-II Bill compartment Bill Clip Coin compartment Cash Tray Coin Roll Storage...
  • Page 9: Functional Test

    Tray for CR-4020 9 Bill compartment Cash Tray Tray for CR-4210/ 4211/ 4212/ 4213/ 4214/ 4215-II / 6210/ 6214/ 6215 Bill compartment Coin Roll Storage Cash Tray Bill Weight Coin compartment FUNCTIONAL TEST CR4000 / 4020 / 4100 / 4210 / 6210 1.
  • Page 10 to the normal display mode. In case the cash drawer is connected to serial port other than COM1 please substitute COM1 above to proper port name. If the pre-set security code of CR-4002/ 4102/ 4212 has been changed from default 07 Hex. Please change the CTRL-G above accordingly. For CR4001/ 4101/ 4211/ 4004/ 4104/ 4214/ 6214, this code can be replaced by any character.

Table of Contents