Planet KVM-800 User Manual page 26

8/16-port kvm switch
Hide thumbs Also See for KVM-800:
Table of Contents

Advertisement

PS/2 mode with the correct adapter. Try a different
mouse.
Avoiding moving the mouse or pressing the mouse
buttons when switching ports.
Avoiding switching ports during shutting down the
PC process.
When you switch one PC port to another PC port, the
best scan time setting need to be set to 5 sec. or
more. Normally, the VGA monitor change one reso-
lution mode to another will take one or two seconds.
So, the scan time is not recommended to below 5
seconds.
8.
The power switch is off, but the switch still works fine or
power adapter is unplugged from the switch, but the
switch still works fine.
KVM Switch unit draws the power source from power
adapter and all PC's PS2 port. Some PC's PS2 port can
support enough power for the switch, but some PC's PS2
port ( like laptop, notebook computer...etc.) is unable to
supply enough power for the switch. In order to make
sure the system can work steadily, please do not set
power switch to off state or remove the power adapter
from the switch.
Although the PCs connected to KVM Switch unit are able
to support enough power to the stand alone switch, KVM
Switch unit still needs a power adapter for daisy chain
more banks.
9.
If forgetting the " password " you typed, please contact
your supplier.
- 22 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kvm-1600

Table of Contents