Windows Xp; Installation Method 4 - Sharp AR-C260M Installation Manual

INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)

Installation method 4

Use this procedure to install the software in the following environments:
1. The printer is connected by USB cable or parallel cable.
2. Windows version: Windows XP
NOTE
To install this software, you must have administrator's rights.
Install the software as follows.
Installing the software in Windows XP (USB/parallel interface)
Install the software as follows.
Before starting the installation, make sure the USB or parallel interface cable is not connected to the machine.
1 Insert the "PRINTER UTILITIES" CD-ROM
that accompanied the machine into your
CD-ROM drive.
Click the [start]
2
Computer], and then double-click the CD-
ROM icon.
NOTE
If the "Found New Hardware Wizard" appears during the
software installation, be sure to click the [Cancel] button.
3 Double-click the [SETUP] icon.
4 Follow the on-screen instructions.
G G G G More information on installation
(1) To install the following items, select "User
Tools" in the "Tool Selection" screen.
PCL5c Printer Driver, PCL Display Font
(2) In the package selection screen, select the
checkboxes of the items that you wish to install.
The "Printer Status Monitor" and "Printer
Administration Utility" are not supported by USB
or parallel connection, only network connection.
10
button, select [My
(3) In the cable selection screen, select "USB" or
"Parallel" and click the [Next] button.
NOTE
If a digital signature warning message appears in
Windows XP (this may appear several times), click
the [Continue Anyway] button.
(4) When you connect the machine to your
computer by USB cable or parallel cable, your
computer will detect the machine and the Plug
and Play window will appear. Follow the
instructions in the Plug and Play window to
install the printer driver. (To connect the cable,
see page 12.)
NOTES
G If you are using a parallel cable, make sure that
the machine and your computer are turned off
before connecting the cable.
G If the "Hardware Installation" screen appears, click
the [Continue Anyway] button.