Table of Contents
Advertisement
2nd phone for 3400.qxd
33.
Press
changed the setting to PBX mode.
Line Type
34. Press
If you selected PSTN in steps 32-33, skip to step 37.
35. If you selected PBX in steps 32-33, the
number — 9, for example — for accessing PSTN from the PBX (the
access number needed to get an "outside" line). The number may
contain up to 10 characters.
Note: If the second line on your fax machine will not need an
Note: If you make a mistake, press
36. Press
37. The
LCD
which is Fax Ready. (See your fax machine's operating instructions
for more on reception modes.)
Fax Ready
Note: Some models don't require you to set the reception mode.
Note: If Tel Ready appears, your fax machine's auto-answer mode is
38. Press
12/16/99
6:48 PM
or
until the setting you want appears. Here, we've
(2):PBX
Program/Enter
to save the setting and continue.
ENTER
access number to make PSTN calls (to reach an outside line),
skip to step 36 without entering the access number.
PSTN Access No.
_
change just one character, press
to move it right. Press
re-enter the fax number correctly.
to save the number and continue.
ENTER
now shows your fax machine's current reception mode,
Program/Enter
If your machine's
LCD
play above, skip to step 39.
turned off. Press
AUTO ANSWER
light shines to indicate that your fax will automati-
ANSWER
cally answer calls.
to save the setting and continue.
ENTER
Page 7
now asks you to enter a
LCD
(2)
to erase to the left. To
CANCEL
to move the cursor left, or
to erase the number. Then
CANCEL
doesn't show the reception mode dis-
to select Fax Ready. The
AUTO
7
Advertisement
Table of Contents
