2nd phone for 3400.qxd
"Check Message" printouts
When a fax call ends and your machine detects an error, it prints a
"Check Message" report. This printout lists the following information
about the transmission:
• The error code
• A communications error messages (see below)
• The phone number (or TTI) of the fax machine with which your
machine had attempted to communicate
• The phone line number (line #1 or line #2 on your fax machine).
Error messages and their meanings
The error messages below are in addition to those listed in the "Just in
case" section of your fax machine's operating instructions:
Error message
Check the Tx and Rx settings
Check no. dialed and line type • While the phone line type is set to
12/16/99
6:48 PM
Page 11
Possible meanings
• Communication type is set to Rx.
• The two faxes were incompatible.
PSTN, the phone number is for PBX.
• The phone line type is PBX and the
phone number is for PSTN, but there
is no PSTN access number stored.
Er
11