Specifying Track; Selecting A Track Directly; Pausing Video Cd Playback - Pioneer DVH-P4050MP Operation Manual

Operating this unit
# Fast forward/fast reverse may not be possible
at certain locations on some discs. If this hap-
pens, normal playback automatically resumes.
3 To skip back or forward to another
track, press o or p.
Pressing p skips to the start of the next
track. Pressing o once skips to the start of
the current track. Pressing again will skip to
the previous track.
Track numbers are displayed for eight sec-
onds.
# Using NUMBER also performs the same op-
eration. For more details, refer to Specifying track
on this page.
4 To stop playback, press g.
# When you stop Video CD playback by pressing
g, that location on the disc is memorized en-
abling playback from that point when you play
the disc again.
# To resume playback, press f.
# If the remote control is set to DVH, g does
not operate.

Specifying track

To perform this function, set the remote con-
trol to DVD mode.
! You cannot operate this function by using
NUMBER when the remote control is set to
DVH mode.
% Press NUMBER corresponding to a de-
sired track.
Track number is displayed for eight seconds
and playback starts from the selected track.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.
Notes
! With some discs, the icon
played and operation may not be possible.
! With Video CD, direct search is not possible
during PBC playback.

Selecting a track directly

When using the remote control, you can select
a track directly by entering the desired track
number.
! To perform this function, set the remote
1
Track number input display appears.
2
number.
# You can cancel the input number by pressing
CLEAR.
3
The track of entered number will play.
! After entering the number input mode, if you
! During playback of Video CDs featuring PBC

Pausing Video CD playback

Pause lets you temporarily stop disc playback.
% Press f during playback.
The icon e is displayed and playback is
paused, letting you view a still image.
# To resume playback at the same point that you
turned pause on, press f again.
Depending on the disc and the playback location
on the disc, the icon
ing that still playback is not possible.
may be dis-
control to DVH mode.
Press DIRECT.
Press 0 to 9 to enter the desired track
! To select 3, press 3.
! To select 10, press 1 and 0 in order.
Press DIRECT.
Notes
do not perform an operation within about
eight seconds, the mode is automatically can-
celed.
(playback control), this function cannot be op-
erated.
Note
may be displayed, indicat-
Section
03
25
En