Using Compression And Bass; Emphasis; Using Its Playlists - Pioneer DEH-P5150UB Operation Manual

Section
Available accessories
06
Function and operation
Play mode, Random mode, Scan mode,
Pause and TitleInput "A" operations are basi-
cally the same as that of the built-in CD player.
Function name Operation
Refer to Selecting a repeat play
range on page 15.
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the multi-CD
player are:
Play mode
! M-CD repeat – Repeat all
! Track repeat – Repeat just the
! Disc repeat – Repeat the cur-
Refer to Playing tracks in random
Random mode
order on page 15.
Refer to Scanning folders and
Scan mode
tracks on page 15.
Refer to Pausing playback on page
Pause
15.
Refer to Entering disc titles on
TitleInput "A"
page 16.
Notes
! To return to the playback display, press
BAND/ESC.
! If you select other discs during repeat play,
the repeat play range changes to
M-CD repeat.
! If you perform track search or fast forward/re-
verse during Track repeat, the repeat play
range changes to Disc repeat.
! After track or disc scanning is finished, nor-
mal playback of the tracks begins again.

Using compression and bass

emphasis

You can only use these functions with a multi-
CD player that supports them.
48
En
discs in the multi-CD player
current track
rent disc
Black plate (48,1)
COMP (compression) and DBE (dynamic bass
emphasis) functions lets you adjust the sound
playback quality of the multi-CD player.
1 Use MULTI-CONTROL to select
Compression in the function menu.
Refer to Introduction to advanced operations
on the previous page.
# If the multi-CD player does not support
COMP/DBE, NO COMP is displayed when you at-
tempt to select it.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
COMP OFF—COMP 1—COMP 2—
COMP OFF—DBE 1—DBE 2

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from the multi-CD
player magazine. After you have added your fa-
vorite tracks to the playlist, you can turn on ITS
play and play just those selections.
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
Creating a playlist with ITS programming
1 Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2 Use MULTI-CONTROL to select
ITS memo in the function menu.
Refer to Introduction to advanced operations
on the previous page.
3 Select the desired track by pushing
MULTI-CONTROL left or right.
QRD3028-A/N
< >48