Pioneer SC-25 Operating Instructions Manual page 34

Troubleshooting (Continued)
Advanced MCACC cannot be updated
Cause 1:
An error message may appear if there are not enough system resources
available.
If an error message appears (like the one explained above in Cause 1) of
installed (page 32), restart your PC and start the installer (PioneerAdvancedMCACC_e_ver_*_*.exe) with
no other applications active.
Cause 2:
Updating of Advanced MCACC may fail because of incompatibilities with other
applications.
Try the following, in the order indicated.
1) If there are any other applications active, exit the other applications and try starting the installer
(PioneerAdvancedMCACC_e_ver_*_*.exe) again.
2) If that does not work, try restarting your PC, and starting the installer
(PioneerAdvancedMCACC_e_ver_*_*.exe) with no other applications active.
Reverb characteristics graph cannot be printed
Cause:
It is not possible to print reverb characteristics graphs displayed in the "ALL"
mode.
Print after selecting an individual channel or frequency graph.
Some functions in application operation cannot be used
Cause:
You may not properly use the application software not corresponding to your
receiver.
Check the model number of your receiver and use the application software corresponding to it.
34
Advanced MCACC cannot be
ALL display
Continue