What's In The Supplied Mounting; What Else You'll Need; Preparation; Mounting Your Center Or Station - Philips WACS7000 User Manual

16.1 How to mount the Center
and Station onto walls
IMPORTANT!
– The wall mounting instructions are for
the use by a qualified wall mounting
personnel only!
– Request for a qualified personnel to help
you with the wall mounting,which includes
drilling holes on the wall,fixing the
mounting brackets to the wall,and
mounting the sets onto the brackets.

16.1.1 What's in the supplied mounting

kits
For Center:
For Station:

16.1.2 What else you'll need

– 8 x screws for fixing the Center's bracket
– 6 x screws for fixing the Station's bracket
– Drilling tools (e.g. electric drill
1 x mounting bracket
3 x screws (for
mounting the Center)
1 x protective card
sheet
1 x mounting bracket
2 x screws (for
mounting the Station)
16.Appendix

16.1.3 Preparation

●
To find a suitable location for mounting, try the
necessary rear connections and the Wi-Fi
connection between the Center and Station (see
3.Installation).
●
The qualified wall mounting personnel should:
– learn about the piping, wiring and other
relevant information inside your walls to avoid
unexpected damages;
– according to the materials of your walls,
decide what type of screws you need to fix
the mounting brackets that is able to
withstand the weight of a Center or Station;
– according to the drilling requirements, choose
suitable drilling tools;
– take other precautions necessary for the wall
mounting work

16.1.4 Mounting your Center or Station

1
Align the bracket (for the Center or Station) in
the chosen location on a wall. Use a pencil to
mark the drilling positions.
Center
2
Drill the holes as marked.
3
Fix the brackets to the wall using suitable screws
(not supplied).
4
As shown, fasten the supplied screws to the
Center or Station using a screwdriver.
Center
Station
Station
65