To Listen To A Preset Station; Rds; News; Activating News - Philips WACS7000 User Manual

8. FM radio
3
On the Center or Station, press 3 or 4 or the
Numeric Keypad (0-9) to select your desired
preset number.
4
Press OK
➜
Current radio station is stored to that preset
location.

8.2.3 To listen to a preset station

1
Press 1 to enter the list of preset stations
2
Use the navigation controls 3 or 4 followed by
2 to select the desired station.

8.3 RDS

RDS (Radio Data System) is a service that
allows FM stations to send additional information
along with FM radio signal.
1
Tune to the desired RDS radio station (see 8.2.1
Autostore: automatic programming).
➜
The display shows the following information
PORTABLE
(if available):
– name of the radio station
– radio frequency
– program type (for example: News, Pop Music)
– RDS radio text
44
OK
SAME ARTIST
DBB
SEARCH
SMART EQ

8.4 NEWS

You can activate NEWS while listening to HD,
CD, USB, UPnP, AUX or PORTABLE source on
WACS7000.The set will tune to the news radio
station if the related signals are received from a
RDS station.

8.4.1 Activating NEWS

●
During playback in HD, CD, USB, UPnP, AUX or
PORTABLE source, press RDS/NEWS on the
remote control.
PORTABLE
➜
The icon appears and NEWS ON is
displayed briefly
➜
Playback continues when the set scans the
first 10 preset stations
➜
When news transmission is detected, the set
will switch to the news station.The icon
starts flashing
Helpful hints:
– Make sure that you have stored RDS stations in
the first 10 preset locations (see 8.2.1
Autostore: automatic programming).
– If no news transmission is detected during the
scanning of the set, the icon
and NO RDS NEWS is displayed.

8.4.2 Deactivating NEWS

●
Press RDS/NEWS again on the remote
control.
●
Switch the set to Radio source
➜
The icon disappears and NEWS OFF is
displayed briefly.
SAME ARTIST SAME ARTIST
DBB
SEARCH
SMART EQ SMART EQ
disappears