Panasonic KX-TD612E User Manual page 25

ANSWER: Used to answer an
ANSWER
incoming call.
AUTO ANSWER/MUTE: Used to
receive an incoming intercom call in
AUTO ANSWER
the hands-free mode or mute the
MUTE
microphone during a conversation.
AUTO DIAL/STORE: Used for System
AUTO DIAL Speed Dialling or storing programme
changes.
STORE
CO: Used to make or receive an
outside call. A Loop-CO button
supports all lines. Pressing this button
(CO)
seizes an idle line automatically.
(Button assignment is required.)
(Only the CO "number" (e.g. 1, 2) may
be shown on some telephones.)
Conference: Used to establish a three-
party conversation.
CONF
DSS: Used to access the extension.
(Only the "S" may be shown on some
(DSS)
(DSS) telephones.)
R (FLASH): Sends a flash signal to the
Central Office or a host PBX to access
FLASH
their features (External Feature
Access). This button is applicable
when the PBX has CO lines, not when
it only has ISDN lines.
Function: Located beside the display.
Used to perform the displayed function
or operation.
Call Forwarding/Do Not Disturb:
Used to perform Call Forwarding or Do
FWD/DND
Not Disturb.
Jog Dial: Used to adjust the volume
and the display contrast or select
desired items for each function.
Operation
2.1 Before Operating the Telephones
INTERCOM: Used to make or receive
an intercom call.
INTERCOM
MESSAGE: Used to leave a message
waiting indication or call back the party
MESSAGE
who left the message waiting indication
/used to replay voice messages.
MODE: Used to shift the display to
access various features.
MODE
PAUSE: Used to insert a pause during
dialling.
PAUSE
PROGRAM: Used to enter and exit the
Station Programming mode.
PROGRAM
Programmable Feature: Located on
the upper part of the CO button or on
the Console. Assigns the desired
(PF)
button and used to access the stored
function. Mostly used as a one-touch
dialling button.
(Only the "F and number" may be
shown on some telephones.)
REDIAL: Used to redial.
REDIAL
RELEASE: Used to disconnect the
RELEASE
line.
SELECT: Used to select the displayed
function or to call the displayed phone
SELECT
number.
SHIFT: Used to access the second
level of Soft Button functions.
SHIFT
25