MX-118B Band Pass Subwoofer
Features
- Single 18 " high efficiency 4 " voice, coil low
frequency transducer with aluminium die-cast
frame.
- High Power Handling Capabilities up to 2400
Watts.
- Compact 4th order band pass design providing
high efficiency without the need for a
crossover.
- Available in 4 or 8 ohm configurations.
- Two integral carry handles.
- Integral pole mount adapter.
- 18mm (3/4 " ) birch plywood construction.
The MX-118B consists of a heavy duty custom 18 low frequency driver in a sturdy and
portable bandpass enclosure optimally tuned for extended low frequency response. Where
significant extension of low frequency output of a system is required, the addition of one
or more MX-118B subwoofers will provide high output low frequency enhancement to the
overall system.
The MX-118B's bandpass enclosure design provides for uniform low frequency reproduction
without the need for a crossover.
For demanding, high output applications, it is recommended that each MX-118B be powered
with a dedicated, high powered amplifier channel. The MX-118B rear panel connector plate
provides input connections from the output of the amplifier via dual NL-4 Speakon type
connectors that are located on the rear mounted input plate and allow for parallel through
connections to additional enclosures. (See Specifications on page 29)
MX Series
28