Mono Channel Eq Section; Stereo Channel Inputs; Balance & Level - Wharfedale Pro EZ-M Owner's Manual

Stereo Channe l Inputs
E ach of the stereo channel
(3/4, 5/6, 7/8, 9/10) fe ature two line level inputs
with ¼" Tip/Ring/Sleeve
b alanced and unbalanced left and right input
s ignals. These inputs can accommodate both
stere o and mono inputs. When using a mono
s ource, connect the cable to the LEFT (MONO)
in put only. Stereo Channels 3 /4, 5/6, 7/8, and
9 /10 have stereo Inputs with left and right ¼"
T ip/Ring/Sleeve (TRS) input jacks.
L EFT (MONO) input: When only one plug is
in serted into the LEFT jack, the channel
o perates as a mono channel.
BALANCE and LEVEL
BALANCE Cont
8
On a stereo chann
c onnected, turning the BALANCE control to the
le ft will cause right input's signal level to
d ecrease. Turning the BALANCE control fully
ri ght on a stereo channel will cause the left
input's signal level to decrease. If a mono input
is connected to a stereo channel, the BALANCE
control will function as a PAN contr
adjusting the left/right balance of the mono
signal being sent to the left and right MAIN MIX
outputs.
Stereo Channel Level Control
9
The stereo channel level control knob
allows for volume control of both the left and
right signals being sent to the MAIN MIX maste
volume control. If a mono input is connected t
a stereo channel, the channel functi
mono channel.
s on the EZ-m 16x2
(TRS) jacks for both
rol
el, with a stereo input
ol by
r
o
ons like a
6
8
9