Advertisement
Advertisement
Table of Contents
Related Manuals for Wharfedale Pro R-1604FX
Summary of Contents for Wharfedale Pro R-1604FX
- Page 1 WHARFEDALE PRO R-1604FX & R-2004FX OWNER S MANUAL...
- Page 2 R Series Mixers R-1604FX & R-2004FX Introduction Thank you for your purchase of a Wharfedale Pro R-1604FX / R-2004FX mixer. Please read this manual completely to ensure proper operation and complete understanding of the features of these products. The Wharfedale Pro R...
-
Page 3: Warranty
R Series Mixers R-1604FX & R-2004FX Getting Started 1. Power Supply The R Series mixer is supplied with an external power supply unit. Use only the power supply supplied with your mixer. Using any another power supply could damage your mixer or other equipment. Connect the power supply to the mixer BEFORE connecting it to the power source outlet. -
Page 4: Aux Section
5. EQ Section Each mono channel on the R-1604FX features a three band Equalization ( EQ ) section. Each band allows for up to 15 decibels of boost (increase) or cut (decrease) of the signal in the tone range for which it controls (HI, MID, LOW). - Page 5 R Series Mixers R-1604FX & R-2004FX POST: A POST fader aux derives its signal after the channel fader. Any changes made on the channel fader affect the signal level that is sent to the buss (output). This type of is commonly used to supply audio signals to an effects processor such as a reverb or a delay in both sound reinforcement and recording applications.
-
Page 6: Stereo Input Channel
R Series Mixers R-1604FX & R-2004FX Stereo Input Channel: The stereo channels on the R-1604FX and the R-2004FX feature two unbalanced line level inputs with Tip / Sleeve (TS) jacks for left and right input signals. These inputs can accommodate both stereo and mono inputs. When using a mono source, connect the cable to the LEFT input only and the channel PAN control will operate like the other mono channels on the mixer. -
Page 7: Track Output
R Series Mixers R-1604FX & R-2004FX 21. EFX to MAIN / AUX: Level controls for the EFX Return Jacks as described in #20. 22. Internal EFFECT Preset Select Knob: This knob allows the selection of the desired digital effect. The level of t he chosen effect is controlled by the EFX RETURN knobs explained in #20 and #21. - Page 8 R Series Mixers R-1604FX & R-2004FX 30. 2 Track to Mix button: Engaging this button allows the routing of the 2 Track Input (TAPE IN) to the MAIN MIX. The playback volume is controlled by the 2TK LEVEL knob (#39).
- Page 9 R Series Mixers R-1604FX & R-2004FX Rear Panel R-1604FX / R-2004FX 41. Channel Insert Jacks (R-2004FX only): All mono input channels on the R-2004FX are equipped with Channel Insert jacks. These jacks are wired pre-fader, post EQ and pre Aux Send. The Insert...
-
Page 10: Microphone Inputs
R Series Mixers R-1604FX & R-2004FX Connections The R Series mixers use 3 different types of audio connectors: 3 pin XLR, phone jacks and RCA phono jacks. Some of these connections are balanced (3 conductor), unbalanced (2 conductor), and some are stereo or have other multiple functions. - Page 11 R Series Mixers R-1604FX & R-2004FX .10. BLOCK DIAGRAM R-1604FX...
- Page 12 R Series Mixers R-1604FX & R-2004FX .11. BLOCK DIAGRAM R-2004FX...
- Page 13 R Series Mixers R-1604FX & R-2004FX .12. *0dB=0.775Vrms, 0dBV=1Vrms SPECIFICATIONS - R-1604FX / R-2004FX Maximum Output Level +22dB(MIX L / R, ALT 3~4) @600 ohm (0.5% T.H.D at 1kHz) +22dB(AUX. EFX SEND) @600 +22dB(INSERT) @40 k +22dB(CTRL ROOM) @600 Over 130mw (Headphone) @40 Total Harmonic Distortion 0.0025% @+14dB 20Hz~20kHz...
- Page 14 R Series Mixers R-1604FX & R-2004FX .13. Input Connector Input Impedance Regular Impedance Regular Input Level Connector Type Channel Mic 50~600 -60dB Balanced Channel Line -30dB Phone Jack (TRS) Stereo Input -20dB Unbalanced Phone Jack Effect Return +4dB Unbalanced Phone Jack...
- Page 15 Wharfedale Professional IAG House, Sovereign Court, Ermine Business Park, Huntingdon, PE29 6XU www.wharfedalepro.com...