Resetting Your Bookman; Book Card Care - Franklin BOOKMAN XST-2051 User Manual

Resetting Your BOOKMAN

If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
twice. If nothing happens, follow
ON/OFF
the steps below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addition,
resetting your BOOKMAN unit erases set-
tings and information entered into its built-
in book, and in an installed book.
1. Hold and press
CLEAR
If nothing happens, try Step 2.
2. Use a paper clip to gently press
BOOKMAN's reset button.
This unit may change operating modes
due to Electro-static Discharge. Normal
operation of this unit can be re-estab-
lished by pressing the reset key,
or by removing/replacing batteries.
Troubleshooting BOOKMAN
• Make sure your book card, if any,
is installed correctly.
• Check that your book card's metal
contacts are dirt-and dust-free.
and then press
CLEAR
.
ON/OFF
ON/OFF

Book Card Care

• Do not touch the metal
contacts on your book cards.
Caution: Touching these electrical
contacts with statically charged
objects, including your fingers, could
erase information entered in a book
card or built-in book.
• Do not put excessive weight
on your book cards.
,
• Do not expose your book
cards to heat, cold, or liquids.
16