Western Digital Data Lifeguard Tools User Manual page 12

3. Select Installation Type as Add the drive as an additional device. To create customized
partitions, select the box to change advanced options and check Custom Partition.
4. The Custom Partition Setup screen below appears. Your hard drive is automatically
partitioned to the largest capacity up to 137 GB based on your operating system
limitations. If the drive contains existing partitions and you want to create or add
partitions, you must first click Delete to remove existing partitions. To add partitions, use
the slider bar to the desired size of the partition, then click Add Partition. After
configuring the partitions, click Next.
5. The next screen outlines your setup options, number of partitions, file format, and the
size of each partition. Data Lifeguard Tools is now ready to set up your new hard drive.
Click Erase then Next.
CAUTION: Continuing will erase all existing data on the hard drive. If you are certain,
click Yes to proceed with format and partition.
DATA LIFEGUARD TOOLS
USER MANUAL
USING DATA LIFEGUARD TOOLS – 9