Wireless Setup - TRENDnet TEW-435BRM Quick Install Manual

Wireless Setup

In order to use the Access Point in the TEW-435BRM, other
Wireless devices must use the same SSID and WEP settings
as the TEW-435BRM.
The TEW-435BRM's default settings are as follows.
Setting
SSID
WEP
Ensure the TEW-435BRM and the other Wireless Sta-
tions are using the same settings.
• Use the Wireless screen to configure the Wireless Access
Point in the TEW-435BRM.
• Configure the Wireless stations (PCs) using your normal
method for configuring the Wireless interface.
• Wireless Stations must also be set to use Infrastructure
mode.
• By default, the TEW-435BRM will automatically accept
both 802.11b and 802.11g connections.
TEW-435BRM
Default value: default
This may be changed on the Wireless
screen, on the TEW-435BRM's main
menu.
Default value: Disabled
Use the Wireless screen, on the TEW-
435BRM's main menu, to enable and con-
figure WEP.
Page 7