TRENDnet TEW-435BRM Quick Install Manual page 3

•
The Power LED should be ON.
•
The Status LED should flash, then turn Off. If it stays on,
there is a hardware error.
•
For each LAN (PC) connection, one of the LAN LEDs
should be ON (provided the PC is also ON.)
•
The WLAN LED should be ON
•
The WAN LED should be ON.
Configuration
1. Start your PC. If it is already started, restart it.
It will then obtain an IP Address from the TEW-
435BRM's DHCP Server.
2. Start your WEB browser. In the Address box, enter the
following:
3. When prompted, use the following username and pass-
word.
•
User name:
•
Password:
4. The Setup Wizard will run automatically.
5. Step through the Wizard until finished. Refer to the data
from your ISP, and the table below, to ensure your
choices are correct.
Connection Type
Dynamic IP Address
Specified (Fixed)
IP Address, or
IPoA (IP over ATM)
PPPoE, PPPoA
HTTP://192.168.0.1
admin
password
Data required.
Usually, none.
IP Address allocated to you, and
related information.
Login name and password.
Page 2