Download Print this page

Clock Setting; Alarm Setting; Specifications - Franklin KAKURO KUR-325-01 User Manual

Franklin user's guide games kur-325-01

Advertisement

7.
Press START/SOLVE to check your answers.
If your solution is correct, the timer stops and "Good" flashes. Press
START/SOLVE again to select another puzzle.
If your solution is incorrect, "Err" flashes. Specific incorrect numbers are not
indicated. Press START/SOLVE to continue the game.

Clock Setting

1. Press MODE/PAUSE until you see the clock.
"Alarm" is displayed at the top left of the screen. Note: If no button is
pressed for 1 minute when the clock is displayed, the device automatically
turns off.
2. Press SET to enter Setting mode.
The active field flashes. Press MODE/PAUSE at any time to exit Setting mode.
3. Press UP or DOWN to adjust the current field.
4. Press SET to advance to the next field.
Setting mode advances through the fields in the order: Seconds, Minutes,
Hour, Month, Day, Year. Note: At any field, press LEFT or RIGHT to
change between the 12-and 24-hour clock.
5. Press SET in the Year field to exit Setting mode.

Alarm Setting

1. Press MODE/PAUSE until you see the alarm clock.
"AL" is displayed on the screen.
2. Press LEFT or RIGHT to turn the alarm on or off.
3. With the alarm turned on, press SET to enter Setting mode.
The active field flashes. Press MODE/PAUSE at any time to exit Setting mode.
4. Press UP or DOWN to adjust the Minutes field and press SET to
advance to the Hour field.
5. Press UP or DOWN to adjust the Hour field and press SET to exit
Setting mode.
Note: When the alarm sounds, press any key to turn it off or it will
automatically turn off after 1 minute.

Specifications

Model: KUR-325-01 KAKURO
Batteries: 2 x AAA
Size: 157 x 85.5 x 26mm
ISBN 1-59074-377-6
Note: This device should be disposed through your local electronic product
recycling system - do not throw into the trash bin.
Note: Please save all packing materials, as it contains important information.
This unit may change operating modes, lose information stored in memory, or fail to respond due to
electrostatic discharge or electrical fast transients. Normal operation of this unit may be re-established by
pressing the Reset button, by pressing ON/OFF, or by removing and replacing the batteries.
4

Advertisement

loading

This manual is also suitable for:

Kur-325