TP-Link TL-WR841N User Manual page 22

2) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-9. Then you can go on with the wireless configuration.
If you are visiting the Router from the main computer, please select Yes, and then
click Clone MAC Address.
If you are visiting the Router from another computer, rather than the main computer,
please select No, and then enter the main computer's MAC in the field WAN MAC
Address.
3) If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-8.
TL-WR841N/TL-WR841ND
Figure 3-8 Quick Setup – MAC Clone
Figure 3-9 Quick Setup – MAC Clone
- 14 -
300Mbps Wireless N Router