Panel Layout; The Front Panel - TP-Link TL-WR740N User Manual

1.4

Panel Layout

1.4.1

The Front Panel

The Router's LEDs and the QSS button are located on the front panel (View from left to right).
Name
（Power）
(System)
(WLAN)
(WAN),
 (LAN 1-4)
Slow Flash
(QSS)
Quick Flash
Note:
After a device is successfully added to the network by QSS function, the QSS LED will keep on for
about 5 minutes and then turn off.
TL-WR740N/TL-WR741ND
Figure 1-1 Front Panel sketch
Status
Off Power is off.
On Power is on.
Flashing The Router is working properly.
On /Off The Router has a system error.
Off The Wireless function is disabled.
Flashing The Wireless function is enabled.
Off There is no device linked to the corresponding port.
There is a device linked to the corresponding port but
On
there is no activity.
Flashing There is an active device linked to the corresponding port.
A wireless device is connecting to the network by QSS
function. This process will last in the first 2 minutes.
A wireless device has been successfully added to the
On
network by QSS function.
A wireless device failed to be added to the network by
QSS function.
Table 1-1 The LEDs description
150Mbps Wireless N Router
Indication
4