TP-Link TL-WPA281 User Manual page 20

Method Two:
Step 1: Press the WPS button on the front panel of the device for 2 seconds.
Step 2: For the configuration of the wireless adapter, please choose Push the button on my access
point in the configuration utility of the WPS as below, and click Next. (QSS, also called WPS, is
used by our company on the wireless adapter.)
Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration.
The status LED on the Powerline Extender will light green for five minutes if the device has
been successfully added to the network.
TL-WPA281/TL-WPA271
The WPS Configuration Screen of Wireless Adapter
Wireless N Powerline Extender
13