TP-Link TL-WR1043ND User Manual page 51

To filter wireless users by MAC Address, click Enable. The default setting is Disable.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear as shown in Figure 4-21 :
Figure 4-21 Add or Modify Wireless MAC Address Filtering entry
MAC Address - The wireless station's MAC address that you want to filter.
Status - The status of this entry either Enabled or Disabled.
Description - A simple description of the wireless station.
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX
00-0A-EB-00-07-8A.
2. Enter a simple description of the wireless station in the Description field. For example:
Wireless station A.
3. Status - Select Enabled or Disabled for this entry on the Status drop-down list.
Figure 4-20 Wireless MAC address Filtering
(X is
-42-
TL-WR1043ND Wireless N Gigabit Router
any hexadecimal digit). For example: