Echo SRM-225 Operator's Manual

Echo SRM-225 Operator's Manual

Hide thumbs Also See for SRM-225:

Advertisement

x7722271404 / x772000164
GRASS TRIMMER /

BRUSH CUTTER

Operator's Manual
The muffler or catalytic muffler and surrounding cover may become extremely hot.
Always keep clear of exhaust and muffler area, otherwise serious personal injury may
occur.
The engine exhaust from this product contains chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
Users of this equipment risk injury to themselves and others if the unit is used
improperly and/or safety precautions are not followed. ECHO provides an operator's
manual and a safety manual. Both must be read and understood for proper and safe
operation. Failure to do so could result in serious injury.
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time
of publication, but are subject to change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
X7722271108
© 03/2013 ECHO Inc.
SRM-225
Burn Hazard

Advertisement

Table of Contents
loading

Summary of Contents for Echo SRM-225

  • Page 1: Table Of Contents

    Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual and a safety manual. Both must be read and understood for proper and safe operation.
  • Page 2: Table Of Contents

    The Operator’s Manual..........................4 The Safety Manual ............................4 Servicing Information ............................4 Parts/Serial Number ............................ 4 Service................................. 4 Echo Consumer Product Support........................ 4 Warranty Registration..........................4 Additional or Replacement Manuals......................5 Safety ................................. 5 Manual Safety Symbols and Important Information..................5 International Symbols ..........................
  • Page 3: Introduction

    Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your unit for Warranty service/repairs, proof of purchase is required.
  • Page 4: Additional Or Replacement Manuals

    ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check the ECHO Web Site for updated information. Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video. SAFETY...
  • Page 5: International Symbols

    Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit. Hand Protection Wear no-slip, heavy duty work gloves to improve your grip on the handles. Gloves also reduce the transmission of machine vibration to your hands. X7722271108 © 03/2013 ECHO Inc.
  • Page 6 ECHO does not recommend the use of ECHO products by anyone who has a pacemaker.
  • Page 7 Keep a Solid Stance • Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach. X7722271108 © 03/2013 ECHO Inc.
  • Page 8: Equipment

    Equipment Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual.
  • Page 9: Emission Control (Exhaust & Evaporative)

    The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual. X7722271108 © 03/2013 ECHO Inc.
  • Page 10: Description

    Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.
  • Page 11 19. PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times. X7722271108 © 03/2013 ECHO Inc.
  • Page 12: Contents

    The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, shield installation and other assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
  • Page 13: Assembly

    Using nylon line heads with metal debris shield can result in trimmer damage, caused by operation with excessive line length. Note: Your nylon line head may appear different than nylon line head shown. X7722271108 © 03/2013 ECHO Inc.
  • Page 14: To Advance Trimmer Line

    2. Remove line head (E) by turning it clockwise until head is completely off of shaft. 3. Remove locking tool (D). Front Handle Installation Note: Label shows minimum spacing for front handle location 1. Position front handle for comfortable operation and secure screws. SPACING X7722271108 © 03/2013 ECHO Inc.
  • Page 15: Operation

    • Brush cutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness. Note: The Barrier Bar is used to restrict rearward movement of the unit. The Barrier Bar is NOT A HANDLE and should not be gripped when using or carrying the unit. X7722271108 © 03/2013 ECHO Inc.
  • Page 16: Blade Selection

    During blade operation, the same fatigue reduction is achieved. Safety to the operator is also enhanced by reducing the possibility of blade contact with the operator's hands and feet by restricting trimmer movement. X7722271108 © 03/2013 ECHO Inc.
  • Page 17: Fuel

    OPERATION Fuel Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement.
  • Page 18: Starting Cold Engine

    1. Stop Switch Move stop switch button (A) forward, away from the STOP position. 2. Choke X7722271108 © 03/2013 ECHO Inc.
  • Page 19: Starting Warm Engine

    The attachment should not move at idle, otherwise serious personal injury may result. Note: If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer. 1. Stop Switch X7722271108 © 03/2013 ECHO Inc.
  • Page 20: Stopping Engine

    Move stop switch button (A) backward to STOP position. If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using unit again. X7722271108 © 03/2013 ECHO Inc.
  • Page 21: Maintenance

    If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded.
  • Page 22: Air Filter

    When servicing model year 2012 and later equipment, only fuel supply hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to $37,500 may be enforced for using an un-certified replacement part. X7722271108 © 03/2013 ECHO Inc.
  • Page 23: Spark Plug

    1. Remove spark plug lead. 2. Remove air cleaner cover (A). 3. Remove engine cover (B). DO NOT use a metal scraper to remove dirt from the cylinder fins. X7722271108 © 03/2013 ECHO Inc.
  • Page 24: Exhaust System

    1. Remove spark plug lead from spark plug, and remove engine cover. 2. Place piston at top dead center. Remove muffler (A) and heat shield (B). 3. Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port. X7722271108 © 03/2013 ECHO Inc.
  • Page 25: Carburetor Adjustment

    This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer.
  • Page 26: Lubrication

    However, if circumstances require disassembly, follow these instructions. 1. Press top of locking tabs (A) on both sides of Speed Feed© head to release cover (B) from eyelet carrier(C). 2. Remove cover from eyelet carrier. X7722271108 © 03/2013 ECHO Inc.
  • Page 27: Nylon Line Replacement

    Trimmer head is now fully loaded and ready for operation. When the wear indicators located at the bottom of the Speed-Feed® head are worn smooth, or if holes appear, replacement of the cover or the entire Speed-Feed® head is required. Wear Indicators X7722271108 © 03/2013 ECHO Inc.
  • Page 28: Sharpening Metal Blades

    MAINTENANCE SRM-225 Sharpening Metal Blades Three styles of metal blades are approved for use on the ECHO Brush Cutter. The 8-tooth blade can be sharpened during normal maintenance. The clearing blade and 80 tooth blade require professional service. Before sharpening, CLOSELY inspect blade for cracks (look at the bottom of each tooth and the center mounting hole closely), missing teeth and bending.
  • Page 29: Troubleshooting

     See your Echo dealer doesn’t start Stop switch off  Turn switch to ON  Spark at end of See your Echo dealer  No spark Electrical problem plug wire Interlock switch See your Echo dealer Spark gap incorrect Adjust to .65mm (0.026 in.)...
  • Page 30: Storage

    Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston reaches the top of its travel and leave it there. 8. Install the spark plug (do not connect ignition cable). X7722271108 © 03/2013 ECHO Inc.
  • Page 31: Specifications

    Speed Feed® 400 LH Nylon line head, Line capacity 6.0 m (20 ft.) Handle Front - loop, Rear handle (w/o rubber) Shoulder Harness Optional Idle Speed 2,750 RPM Clutch Engagement Speed 3,850 RPM Wide Open Throttle Speed (W.O.T.) 8,150 RPM X7722271108 © 03/2013 ECHO Inc.
  • Page 32: Warranty Statements

    PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY THIS LIMITED WARRANTY IS ONLY APPLICABLE TO ECHO PRODUCTS SOLD BY AUTHORIZED ECHO DEALERS. IT IS EXTENDED TO THE ORIGINAL PURCHASER ONLY, AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS. 1-800-432-ECHO.
  • Page 33 PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES ATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS (&+2 3RZHU %OHQGŒ 7ZR6WURNH 2LO THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY: PD[LPXP ® DISCLAIMER OF IMPLIED WARRANTIES MERCHANTABILITY 99922201032 11/18/2011 X7722271108 © 03/2013 ECHO Inc.
  • Page 34: Notes

    NOTES SRM-225 NOTES X7722271108 © 03/2013 ECHO Inc.
  • Page 35 SRM-225 NOTES X7722271108 © 03/2013 ECHO Inc.
  • Page 36 S04011051023/S04011999999 S96811001001/S96811999999 S03912425291/S03912999999 ECHO, INCORPORATED S89312001001/S89312999999 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.com...

Table of Contents