Advertisement
F O U R - H I G H K F 8 6 0 C O N F I G U R A T I O N
Typical Uses: Theatres and small arenas
10
Coverage: +15 degrees to -60 degrees
Bumper Bar Trim Height (nominal): 40 ft
Splay: The boxes are aimed +10, 0, -15, & -35 degrees, so the
boxes should be rigged with 10 degree (top to second box),
15 degree (second to third box), and 20 degree (third box to
0
downfill box) splays.
Aiming: The cluster should be aimed so that the top box
points at the highest seating area. This configuration is tuned
for a 150 ft throw to the farthest seat and maximized vertical
coverage.
-15
Processors: One processor should drive the upper three
boxes. This processor is referred to as "main" in the settings.
A second processor should drive the lowest box.
This processor is referred to as "downfill" in the settings.
• For manual entry – use file 4xKF860.TXT which may be
found at ftp://ftp.eaw.com/PPSTfiles/KF860.
-35
• For ECORE – use file 4xKF860.EAC which may be found
at ftp://ftp.eaw.com/Process/MX8600
F O U R - H I G H " S H E D "
K F 8 6 0 C O N F I G U R A T I O N
Typical Uses: Sheds and small festivals.
0
Coverage: +2 degrees to -60 degrees
Bumper Bar Trim Height (nominal): 27 ft
Splay: The boxes are aimed 0, 0, -15, & -35 degrees, so the
boxes should be rigged with 0 degree (top to second box),
15 degree (second to third box), and 20 degree (third box
0
to downfill box) splays.
Aiming: The cluster should be aimed so that the top box
points at the farthest seat, or straight out for festivals.
This configuration is tuned for a 200 ft throw to the farthest
seat and cuts off very quickly above horizontal.
-15
Processors: One processor should drive the upper three
boxes. This processor is referred to as "main" in the settings.
A second processor should drive the lowest box.
This processor is referred to as "downfill" in the settings.
• For manual entry – use file 4xKF860shed.TXT which may
be found at ftp://ftp.eaw.com/PPSTfiles/KF860.
-35
• For ECORE – use file 4xKF860shed.EAC which may be
found at ftp://ftp.eaw.com/Process/MX8600
Advertisement
