Troubleshooting - Dualit FOOD PROCESSOR Instruction Manual

Table of Contents

Advertisement

ENSURE THE PROCESSOR IS UNPLUGGED WHILST IN
STORAGE, WITH THE LID UNLOCKED. THOROUGHLY
CLEAN AND DRY YOUR PROCESSOR AND ALL
ATTACHMENTS FOLLOWING THE CLEANING
INSTRUCTIONS ON P 21. CHECK THE CONTROL KNOB
IS IN THE OFF POSITION BEFORE STORING. KEEP THE
TOOLBOX OUT OF REACH OF CHILDREN.
Dismantle the processor, clean and dry all parts
Store the: bowls, drive shaft, small blade and lid with
food pusher assembled on the processor body
Do not lock the bowl lid whilst in storage. This can
damage the safety mechanism built into the bowl
The large and medium blades, spatula and all discs
should be stored in the toolbox provided or in the
same manner you would store sharp knives. The
chipping disc will only fit in the second disc slot as
shown below
Keep out of direct sunlight whist in storage.
Grating &
Shaving discs
Adjustable
Chiping
slicing disc
disc
CLEANING AND CARE
STORAGE
Large
E-Disc
Blade
Medium
Spatula
Blade
What do I do if my processor won't turn on?
Check the plug is correctly fitted in the outlet and
the power supply is switch on
Check the power cord is securely attached to the
back of the processor
Check the fuse in the plug. Ensure the new fuse
is the same current value as original
Ensure the bowl and lid are locked in position
Check that the small bowl has properly located onto
the medium bowl. If not the lid will not locate
properly and the processor will not turn on.
What if it switches itself off while I'm using it?
The motor may have overheated. To prevent
damage, the unit will automatically cut all power. If
this happens: Turn switch to off, unplug and allow
the unit to cool for approximately 1 hour. Once
cool the overheat safety feature will reset and you
can carry on using the processor
Check the lid or bowl has not become lose.
What if it doesn't chop uniformly?
Blades or discs may not be attached properly
You may be exerting too much force on the food
while pushing down the feeder tube.
What if my egg whites won't stiffen up?
You may not be using enough eggs (we recommend
a minimum of two eggs)
You may be using the wrong accessory; for egg
whites you need the e-disc and the large bowl
You may not be whisking for long enough
Dough
Your bowl must be completely dry.
Blade
22

TROUBLESHOOTING

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents