On And Off; To Enable City Safety Again - Volvo XC60 Owner's Manual

When the function is activated and brakes, the
instrument panel display shows a message to
the effect that the function is/has been active.
NOTE
The brake lights come on when City
Safety™ brakes the car.
Operation
NOTE
The City Safety™ function is always ena-
bled after the engine has been started via
key position I and II (see page 70 on key
positions).

On and Off

In certain situations, it may advisable to disable
City Safety™, e.g. for driving off-road where
leafy branches could sweep over the bonnet/
windscreen or similar.
Display and direction indicator stalk.
Thumbwheel
RESET button
With the engine running City Safety™ can be
disabled as follows:
1. Use the thumbwheel to scroll to
Safety on the display.
2. Hold the RESET button depressed for 1
second to switch to Off .
However, the function will be enabled the next
time the engine is started, regardless of
whether the system was enabled or disabled
when the engine was switched off.
04 Comfort and driving pleasure
WARNING
The laser sensor also transmits laser light
when City Safety™ is disabled manually.
To enable City Safety™ again:
•
Follow the same procedure as for disa-
bling, but select the
RESET button.
or
•
Switch off the engine and take out the
remote control key to position I, then re-
insert it to position II and start the engine -
by which means City Safety™ is re-
enabled (see page 70 on key positions).
Limitations
City Safety™ sensor is designed to detect
City
cars and other large vehicles in front of the car
irrespective of whether it is day or night.
However, the sensor has limitations and has
poorer functionality in e.g. heavy snowfall or
rain, dense fog, dust storms or snow flurries.
Mist, dirt, ice or snow on the windscreen may
disrupt the function.
Low-hanging objects, e.g. a flag/pennant for
projecting load, or accessories such as auxili-
ary lamps and bull bars that are higher than the
bonnet limit the function.
City Safety™
On
option with the
04
163