Voice Recognition* Mobile Phone - Volvo V70 Owner's Manual

05 Infotainment system

Voice recognition* mobile phone

Introduction
The infotainment system's voice recognition
allows the driver to voice-activate certain func-
tions in a Bluetooth -connected mobile phone
or in Volvo's navigation system - RTI (Road and
Traffic Information System).
NOTE
•
The information in this section
describes the use of voice commands
to control a mobile phone connected
using Bluetooth . For detailed infor-
mation on using a mobile phone con-
nected using Bluetooth with the car's
Infotainment system see page 258.
05
•
The Volvo navigation system RTI (Road
and Traffic Information System) has a
separate user manual which contains
more information on voice control and
voice commands to control that sys-
tem.
Voice commands offer convenience and help
the driver to avoid being distracted, and
instead concentrate on driving and focus
attention on the road and traffic conditions.
1 Only applies to vehicles equipped with Volvo's navigation system - RTI (Road and Traffic Information System).
*
266
Option/accessory, for more information, see Introduction.
WARNING
1
The driver always holds overall responsibil-
ity for driving the vehicle in a safe manner
and complying with all applicable rules of
the road.
The voice recognition system allows the driver
to voice-activate certain functions of a
Bluetooth -connected mobile phone and in
Volvo's navigation system - RTI (Road and
Traffic Information System), while the driver
can keep his/her hands on the wheel at the
same time. The input data are in dialogue form
with spoken commands from the user and ver-
bal replies from the system. The voice recog-
nition system uses the same microphone as
the Bluetooth handsfree system (see illustra-
tion on page 258) and the voice recognition
system's replies come via the car's speakers.
Remember
Steering wheel keypad.
Button for voice recognition
To activate the system
Before voice commands to a mobile phone can
be used the mobile phone must be paired and
connected via Bluetooth handsfree. If a tele-
phone command is given and no mobile phone
is paired, then the system will provide informa-
tion about this. For information on pairing and
connecting a mobile phone, see page 259.
•
Press the button for voice recognition (1) in
order to activate the system and initiate a
dialogue with voice commands. The sys-
tem will then display commonly used com-