Nvr-Based - Vivotek IP Surveillance Overview

Chap.7 Video Management
Installation Wizard 2 is the new generation of VIVOTEK's installation software, in which the embedded intelligent
functions will guide users to set up a network camera with ease. In other words, its "smart mode" enables those
who has not much technical knowledge to be capable of installing a network camera themselves only by a few
"clicks." It can automatically detect users' networking environments and help them get rid of some complicated
setting inputs like IP Address, DDNS, UPnP Port Forwarding, and PPPoE connecting. Then, users may quickly
connect their network cameras over the Intranet or Internet without any other advanced settings. From now on,
the Installation Wizard 2 is free bundled along with VIVOTEK's packages. Therefore, you can enjoy all the benefits
without any additional investment.
Figure 7.2 VIVOTEK Installation Wizard 2
As for ST7501, the functionalities will be introduced in section 7.2. VIVOTEK has formed an alliance with numbers
of central management software development vendors in order to better fulfill customers' needs. For more
information, please go to Alliance page on VIVOTEK website.

7.1.2 NVR-based

An NVR is a standalone recording device, in which video management software is pre-installed, providing easy-to-
use interface and video management platform. It functions as a DVR with a network interface for the connection of
a set of network cameras. However, unlike PC-based, an NVR does not allow changing or upgrading components,
nor does it allow for the installation of additional applications. Due to limited scalability and compatibility, this
platform is widely adopted in small- and medium-sized surveillance systems.
Retail Store
Alarm
NVR
Microphone Speaker
Viewer
Internet
Remote Access
Siren PIR
Administrator
Central Station
Figure 7.3 NVR-based video management platform
46