Vivotek FE8171V User Manual page 145

7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME
mode
daymodebegintime
daymodeendtime
bwmode
sensitivity
enableextled
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME
brightness
saturation
saturationpercent
contrast
sharpness
VALUE DEFAULT
auto, auto
day,
night,
di,
schedule
<product
dependent>
00:00~23:59 07:00
00:00~23:59 18:00
<boolean> 1
low, normal
normal,
high
<boolean> 0
VALUE DEFAULT
-5~5 -5
-5~5,100 0
0~100 50
-5 ~ 5 0
-3~3,100 0
SECURITY DESCRIPTION
(get/set)
6/6 Set IR cut control mode
6/6 Day mode begin time
6/6 Day mod end time
6/6 Switch to B/W in night mode if
enabled
6/6 Sensitivity of light sensor
1/6 External IR led enable
SECURITY DESCRIPTION
(get/set)
4/4 Adjust brightness of image
according to mode settings.
4/4 Adjust saturation of image
according to mode settings.
100 for saturation
percentage mode.
4/4 Adjust saturation value of
percentage when
saturation=100
4/4 Adjust contrast of image
according to mode settings.
4/4 Adjust sharpness of image
according to mode settings.
VIVOTEK
User's Manual - 145