Table of Contents
Advertisement
Status LED
Item LED status
1
Steady red
Red LED off
2
Steady red & Green blinking every 1 sec.
Steady red & Green LED off
3
Steady red & Green LED blilnking every 2 sec.
4
Red blinking every 0.15 sec. & Green blinking
every 1 sec.
5
Red blinking every 0.15 sec. & Green blinking
every 0.15 sec.
Hardware Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after reset, restore the factory settings and install again.
Reset: Press and release the recessed reset button with a paper clip or thin object. Wait for the
Network Camera to reboot.
Restore: Press and hold the recessed reset button for a while to restore. Note that all settings
will be restored to factory default.
SD/SDHC Card Capacity
This network camera is compliant with SD/SDHC 32GB and other preceding standard SD cards.
DI/DO Diagram
Please refer to the following illustration for the connection method.
Description
Power on and system booting
Power off
Network normal (heartbeat)
Network failed
Audio mute (heartbeat)
Upgrading firmware
Restoring default
12V
PIN 1
Power+12V
PIN 2
Digital output
+12V
PIN 3
Digital input
PIN 4
Ground
VIVOTEK
User's Manual - 7
Advertisement
Table of Contents
