Vivotek IP8362 User Manual page 154

VIVOTEK
action_patrol_enable
(only for VS series)
<product dependent>
action_ patrol _server
(only for VS series)
<product dependent>
7.31 Server setting for event action
Group: server_i<0~4>
PARAMETER
name
type
http_url
http_username
http_passwd
ftp_address
ftp_username
ftp_passwd
ftp_port
ftp_location
ftp_passive
email_address
email_sslmode
154 - User's Manual
<Boolean> 6/6 Enable/disable ptz patrol when event triggered. (not used in
IP8362)
0~255 6/6 Indicate the target servers to which the snapshots taken
during patrol dwelling time should be sent.
One bit represents one application server (server_i0~i4).
bit0 (LSB) = server_i0.
bit1 = server_i1.
bit2 = server_i2.
bit3 = server_i3.
bit4 = server_i4.
For example, enable server_i0, server_i2, and server_i4 as
notification servers; the notifyserver value is 21.
(not used in IP8362)
VALUE SECURITY
(get/set)
string[40] 6/6
email, 6/6
ftp,
http,
ns
string[128] 6/6
string[64] 6/6
string[64] 6/6
string[128] 6/6
string[64] 6/6
string[64] 6/6
0~65535 6/6
string[128] 6/6
0, 1 6/6
string[128] 6/6
0, 1 6/6
DESCRIPTION
Identification of this entry
Indicate the server type:
"email" = email server
"ftp" = FTP server
"http" = HTTP server
"ns" = network storage
URL of the HTTP server to upload.
Username to log in to the server.
Password of the user.
FTP server address.
Username to log in to the server.
Password of the user.
Port to connect to the server.
Location to upload or store the media.
Enable or disable passive mode.
0 = disable passive mode
1 = enable passive mode
Email server address.
Enable support SSL.