Vivotek IP8361 User Manual page 146

VIVOTEK
transmission_mode
network_wire
network_wireless
wireless_s802dot11
b
wireless_s802dot11
g
wireless_beginchan
nel
wireless_endchanne
l
wireless_encrypt_w
ep
wireless_encrypt_w
pa
wireless_encrypt_w
pa2
derivative_brand
npreset
eptz
nanystream
iva
ir
tampering
adaptiverecording
146 - User's Manual
Tx,
Rx,
Both
<boolean>
<boolean>
<boolean>
<boolean>
1 ~ 14
1 ~ 14
<boolean>
<boolean>
<boolean>
<boolean>
<positive integer>
<positive integer>
<positive integer>
<boolean>
<boolean>
<boolean>
<boolean>
UART transfer.
0/7 Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
0/7 Indicate whether to support Ethernet.
0/7 Indicate whether to support wireless.
0/7 Indicate whether to support wireless
802.11b+.
0/7 Indicate whether to support wireless
802.11g.
0/7 Indicate the begin channel of wireless
network
0/7 Indicate the end channel of wireless
network
0/7 Indicate whether to support wireless WEP.
0/7 Indicate whether to support wireless WPA.
0/7 Indicate whether to support wireless WPA2.
0/7 Indicate whether to support the upgrade
function for the derivative brand. For
example, if the value is true, the VVTK
product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)
0/7 Number of preset locations.
0/7 A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
0/7 number of any media stream per channel
0/7 Indicate whether to support Intelligent
Video analysis
0/7 Indicate whether to support IR led.
0/7 Indicate whether to support tampering
detection.
0/7 Indicate whether to support adaptive
recording