Vivotek IP8172 User Manual page 100

VIVOTEK
Custom Command
If Custom Camera (scanner) is selected as the PTZ driver, you will need to configure command
buttons to control the PTZ scanner. Click Custom Command to open the Custom Command page
to set the commands in the Control Settings session. Please refer to your PTZ scanner user's
manual to enter the commands in the following fields. Click Save to enable the settings and click
Close to exit the page.
►The command buttons will be displayed on the main page:
100 - User's Manual
NOTE:
►If you select DynaDome/SmartDOME,
Lilin PIH-7x00, Pelco D, Pelco P, or
Samsung scc643 protocol as the PTZ
driver, the Control Settings column
will not be displayed.
►For all PTZ drivers, a total of five
additional command buttons can be
configured.