Kyocera Jax User Manual page 30

Keyguard
Enable Keyguard
Use to lock the keypad immediately or
Keyguard
to automatically lock the keypad after a period of
inactivity to prevent accidental key presses.
From , select one of the following:
Keyguard
to immediately lock the keypad.
•
to lock the keypad after 30 seconds
•
of inactivity.
to lock the keypad after 1 minute of inactivity.
•
to lock the keypad after 5 minutes of inactivity.
•
Note: You can also activate Keyguard by pressing
and holding the
* Shift
Note: In a voice call or an active data call, user
cannot change the keyguard menu setting. User
will be prompted with "Feature can not be used
during a call". Only in dormant data session or
idle mode can the user make any changes to the
keyguard setting.
Unlock Keyguard
From the home screen, select
the key to unlock the keypad.
* Shift
Call Contact using Fast Find
From , select
1. Fast find
on fast find.
From the home screen, press the keys
2.
corresponding to the letters of the name you
want to find. A matching contact or speed
dial entry appears.
22
key.
and press
Unlock
to turn
Enabled
Scroll to your desired contact and press the
3.
key to call the number.
Send
Enable Frequent List
From , select
Frequent list
enabled, the last 15 of your most
Frequent list
frequently called contacts appear at the beginning
of your contacts list. Scroll past the double line to
view the entire contacts list.
Answer Hold
Enable Answer Hold
Use to place incoming calls on hold
Answer Hold
until you are ready to answer them.
From
1. Answer Hold
If you have not recorded a hold message, you
need to record one, such as "Please hold. I'll
answer in a minute."
Record the message twice, as prompted.
2.
Select or
3. Save Options
the following:
to replay your message.
– Play
to record your message again.
– Re-record
to exit.
– Exit
The next time a call comes in, you can place
it on hold.
Place a Call on Hold
You can place a call on hold with
enabled.
Answer Hold
. With
Enabled
, select .
Enabled
and one of
Convenience