Location Services - Vertu Ti User Manual

Connect a Bluetooth device
To connect with a new Bluetooth device, you need to pair your phone with it.
1. Make sure that the Bluetooth device you are going to pair with is in discoverable mode. For details,
see the user guide of the device.
2. Touch >
3. Touch OFF and drag it to the right to turn on and scan. If Bluetooth is already on, touch SEARCH
FOR DEVICES.
4. Touch a device to connect. You may need to touch OK or to enter the device passkey to connect.
For details, see the user guide of the device.
When your phone has connected, the Bluetooth indicator
Tip: Switch Bluetooth off when not in use to conserve battery power.
Warning: Obey all local laws. Always keep your hands free to operate the vehicle while driving.
Your first consideration while driving should be road safety.
Change your device name
You can change the name of your device.
1. Touch >
2. Press Menu
3. Enter new name and touch Rename.
Visible mode
To make your phone visible to other devices:
1. Touch >
2. Touch your device name to make your phone visible for 2 minutes.
To change how long your phone is visible, press Menu

Location services

> > > Location services
To allow apps to use data from sources such as Wi-Fi and mobile networks to determine your approximate
location, touch Google's location service.
To allow apps to use GPS to pinpoint your location, touch GPS satellites.
© 2013 Vertu Corporation Limited. All rights reserved.
Settings > Bluetooth.
Settings > Bluetooth.
> Rename phone.
Settings > Bluetooth.
is shown in the status bar.
> Visibility timeout.
Connectivity
56