Use The Vehicle Charger - Vertu Constellation Reference Manual

Use Vertu Portable Power to charge your Vertu phone
1 To switch on your Vertu Portable Power, press and hold down the power button
until the charging indicator lights are illuminated.
2 Release the integrated USB cable using the cable management lever.
3 Connect the USB cable to the micro-USB connector on the Vertu phone.
4 When charging is complete, disconnect the phone from the pack and re-house the
cable.
To ensure optimum signal performance of your Vertu phone, do not place your Vertu
Portable Power against your phone during calls.
Use Vertu Portable Power to charge a compatible accessory
1 Switch on your Vertu Portable Power. Press and hold down the power button until
the charging indicator lights are illuminated.
2 Connect the cable supplied with your accessory to the auxiliary USB power output
on your Vertu Portable Power.
3 When charging is complete, disconnect the accessory from the pack.
In the unlikely event that the connected accessories draw excessive power from your
Vertu Portable Power, charging is suspended and the indicator lights flash. Disconnect
the accessories and press the power button to reset your Vertu Portable Power.
Note: The surface of this device does not contain nickel in the platings. The
surface of this device contains stainless steel.

Use the vehicle charger

You can use the vehicle charger to charge your Vertu phone battery quickly and safely
from a standard 12 or 24 volt (DC) vehicle cigarette lighter outlet.
1 Connect the charger cable to the micro-USB connector of your Vertu phone. Make
sure the cable is inserted correctly, with the USB symbol facing up.
2 Connect the charger to the powered cigarette lighter outlet.
Accessories 127
© 2012 Vertu. All rights reserved.