Tire Pressure Monitoring (Warning) System - Toyota MATRIX 2010 Quick Reference Manual

SAFETY AND EMERGENCY FEATURES
Doors-Child safety locks
Rear door
Moving the lever to "LOCK" will allow the door to be opened only from
the outside.
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or
replaced, turn the ignition switch to "ON" and press and hold the
" SET" button until indicator blinks three times. Let the vehicle sit for a
few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner's Manual for tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local Toyota dealer.
Note: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently, setting the tire pressures to factory
specifications should turn off the light.
Seatbelts-Shoulder belt anchor
Push up, or squeeze
lock release to lower
System reset initialization
1. Push and hold "
until the indicator blinks
three times.
2. Wait a few minutes to allow
initialization to complete.
20
SET" button