250-Sheet Paper Feed Unit (My-1026) - Toshiba e-studio162 Operator's Manual

250-SHEET PAPER FEED UNIT (MY-1026)

The paper feed unit provide the convenience of increased paper capacity for the unit
and a greater choice of paper size readily available for copying.
The procedures for loading paper in the
paper tray of paper feed unit, changing
the paper size, and selecting the paper
tray are same as for the paper tray in the
unit. See "LOADING THE PAPER TRAY"
(p.15) and "SELECTING THE TRAY"
(p.23).
Using the MY-1026 with the printer function
To use the MY-1026 with the printer function, follow these steps to adjust the
settings in the printer driver.
The printer driver cannot be set for use with the MY-1026 when opened
Note
from the application.
1
Click the "start" button.
2
Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
On Windows 98/Me/NT 4.0/2000, select "Setting" and click "Printers".
3
Click the "TOSHIBA e-STUDIOXXXX" printer driver icon and
from the "File" menu select "Properties".
On Windows 98/Me, click the "TOSHIBA e-STUDIOXXXX" printer driver
icon,
select "Properties" from the "File" menu, and then click the "Setup" tab.
4
Click the "Utility" tab.
5
Select "Two trays" for "Input tray
option", and click "OK".
The printer driver closes. This completes the
settings needed to use the MY-1026.
OPTIONAL EQUIPMENT
Lower side cover
Tray
9
91