Ether Mode Setting - Fostex 8360 Owner's Manual

3. After entering the login name, press the [EXECUTE/YES]
key.
The display now shows the screen for entering a password,
where the leftmost digit flashes initially.
SETUP
4. Enter a password in the same manner as entering a
password.
You can enter up to eight characters for a password.
5. After entering the password, press the [EXECUTE/YES] key.
The display now shows "LoginName01 ?".
flashing

Ether mode setting

To activate the communication function of the
Model 8360, you must set the ether mode to "ON".
<Note>
The settings previously described become effective
when the ether mode is set to "ON".
1. Use the JOG dial to bring up "EtherMode?" and press the
[EXECUTE/YES] key.
The current setting (ON or OFF) flashes (the default is "OFF").
SETUP
SETUP
2. Use the JOG dial to select "ON" and press the
[EXECUTE/YES] key.
The display returns to show "EtherMode?".
8
flashing
flashing