Start-Up Settings; Status & Information; Status Bar Settings; Switch Map - TomTom Blue&Me- 2 LIVE Reference Manual

Start-up settings

Start-up settings
Status & Information
Status & Infor-
mation

Status bar settings

Status bar settings

Switch map

Switch map
Tap this button to set what happens when your Blue&Me-TomTom 2
starts.
Tap this button to find technical information on your Blue&Me-TomTom
2, such as the device serial number, application version and the map
version.
You can also switch information sharing on/off and view the current sta-
tus for GPS reception and your LIVE Services if you have a subscription.
Tap this button to select the information you want to see on the status
bar:
Horizontal - show the status bar at the bottom of the Driving view.

Vertical - show the status bar on the right-hand side of the Driving

view.
Maximum speed

Important: The speed limit is shown next to your current speed and your
speed is shown in red, if you drive faster than the speed limit.
Information about speed limits is not available for all roads.
Current time

Remaining distance - the distance to your destination.

Leeway - your Blue&Me-TomTom 2 shows how late or early you will

arrive, compared with your preferred arrival time that was set when
you planned the route.
Tap this button to select the map you want to use for route planning and
navigation.
Although you can store more than one map on the device, you can only
use one map at a time for planning and navigation.
To switch from the current map to plan a route in another country or
region, simply tap this button.
Note: The first time you switch to a map, you may need to connect to
your MyTomTom account and activate the map.
63