Pairing And Connection - TomTom Blue&Me- Owner's Manual

4.

Pairing and connection

Your Blue&Me-TomTom navigation device and Blue&Me in your car communicate with
Pairing
and
con-
nection
each other using a Bluetooth connection.
To pair your navigation device with Blue&Me, do the following:
1. Turn your car key to the MAR position.
2. Press the MAIN/MENU button on your steering wheel to open the Blue&Me Main Menu
on the cluster display in your car.
3. Use the arrow buttons on the steering wheel to navigate to the Settings Menu.
4. Select Settings, then select Pairing.
A 4-digit PIN code appears on the cluster display. You will use this PIN in a later step.
5. On your navigation device, tap Change preferences, then tap Blue&Me.
6. Tap Find Blue&Me.
7. When your navigation device asks if you want to establish a connection, tap Yes.
8. When your navigation device asks if you want to start searching for Blue&Me, tap Yes.
9. Enter the Blue&Me PIN on your navigation device. This is the PIN that was shown on the
cluster display of your car (see Step 4 above).
A message on the navigation device and the cluster display confirms that the connec-
tion is successful. A confirmation message is shown each time the Blue&Me-TomTom
device is connected or disconnected from Blue&Me.
When your navigation device and your car have been paired, the Car Menu button appears
in the Main Menu of your navigation device.
Occasionally, you may need to repeat the pairing procedure. Take note that the PIN code
will change every time the procedure is repeated. To connect your Blue&Me-TomTom
device to a different car, you need to carry out the full pairing and connection procedure.
7