Show My Frequent Destinations; Using Arrival Times - TomTom Blue&Me- Owner's Manual

Show my frequent destinations

You can set your Blue&Me-TomTom to ask if you want to plan a route to one of your fre-
quently visited destinations, every time the device starts.
To change this setting, do the following:
1. Tap Start-up preferences in the Preferences menu and then select Ask for a destina-
tion.
2. Tap Yes, then tap Yes again to begin entering information about the destination.
3. Select a symbol for the destination and tap Done to set the symbol, then tap Yes.
Tip: If you want to choose a title of your own, select a numbered symbol.
4. Tap Yes and if required enter a new name, then tap Done.
5. Enter the address details in the same way you enter an address when planning a route,
then tap Done.
6. If you want to set more destinations, repeat the steps above. Otherwise, tap Done.
You are asked if you want to change the start-up image.
7. If you want to change the image, follow the instructions shown on the screen. Other-
wise, tap No.
Every time your Blue&Me-TomTom starts, you are asked if you want to plan a route. If you
tap Cancel, you are shown the Main Menu.

Using arrival times

When you plan a route, your Blue&Me-TomTom asks you if you need to arrive at a partic-
ular time.
Tap YES to enter a preferred arrival time.
Your Blue&Me-TomTom calculates your arrival time and shows you whether you will
arrive on time.
You can also use this information to work out when you need to leave. If your Blue&Me-
TomTom shows that you will arrive 30 minutes early, you can wait and leave in 30 minutes
time, rather than arrive early.
Your arrival time is constantly recalculated during your journey. The status bar shows
whether you will arrive on time or if you are going to be late, as shown below:
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before the time
you entered, it is shown in green.
23