Before use Thank you for choosing TEAC. Read this manual care- Precautions for use fully to get the best performance from this unit. p Do not strike the enclosure (cabinet) or front surface Checking the included accessories Saran Fiber with hard objects. Doing so could cause scratching or damage the speaker units.
Setting up the speakers Precautions for installation Using the screw spikes Screw spikes and spike bases are included with these p Do not install in a location that becomes hot, including speakers. Using these spikes might improve the clarity of places exposed to direct sunlight or near heating equip- bass frequencies.
Connecting the speakers Banana plugs Speaker cables After connecting the banana plug to the speaker p Use the included speaker cables or commercially-avail- cable, insert the plug into the terminal. able cables designed for speakers. p We recommend using the shortest speaker cables possible.
Page 5
Connecting the speakers Biwiring Checking the phase These speakers support biwiring, allowing you to directly If the polarities (+/−) of the left and right speakers do connect the LF (low frequency) and HF (high frequency) for not match, they will be out of phase and good stereo each speaker.
Need help?
Do you have a question about the S-300NEO and is the answer not in the manual?
Questions and answers